Pneumatic Grease Pump with standardized 400cc lubricant cartridge loading system

Key features:
- Single-Acting Pneumatic Pump
- Pump: 2cm3 / Cycle
- Maximum Cycle rate: 30 cycles/min depending on grease type
- Ratio: 50:1
- Air pressure: 3 to 6 bar (44-88psi)
- Pump Grease NLGI 2 max 
- Uses a simple (3/2) Solenoid valve for injection and vent

The Pneumatic Grease Pump with cartridge grease loading is an ideal single acting pneumatic grease pump for general use in single line progressive divider lubrication systems such as SMX, SMO, SMP or SMPM when are used with greasing pumps.

The pneumatic grease pump is designed for all those applications where it is ideal to have grease supplied in readily available cartridges.

The pump is equipped with a steel plate with a M57x1.5mm thread that allows interfacing with up to two 400cc lubricant cartridges.

High reliability is guaranteed by the use of hardened steel in the construction in all the pumping element components and the pump piston is manufactured in ground hardened steel.

The Pneumatic Grease Pump provides a simple but very cost effective solution for use on many small grase lubrication systems where compressed air is available and the use of a refill or transfer pump is problematic.